Minka Lavery 1182-357 Manual de Instruções descarregar pdf

INSTALLATION INSTRUCTIONS

For Model # 1182/1183-357 (New 01/17/2003)

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

ASSEMBLING THE FIXTURE (Fig.1)

1. Carefully remove the fixture from the carton and check that

all parts are included as shown in the illustration.

2. Slide Glass Shade (D) along with Plastic Washer (E) and Iron

Washer (F) over Pipe (C), then secure them using Nut (A)

tightly.

3. Connect rod side and shade support together by threading

Nipple (J) into Coupling (K).

HANGING THE FIXTURE (Fig. 2)

4. Shut off power at the circuit breaker and remove old fixture

including the crossbar.

5. Thread Nipple into Loop until snug.

6. Thread other end of Nipple with Loop attached into crossbar

until snug.

7. Place Lock Washer over end of Nipple protruding through

crossbar and thread Hex Nut onto nipple until tight.

8. Take this crossbar assembly and mount to ceiling junction

box with junction box screws. Tighten screws securely with

screwdriver.

9. By measuring determine correct number of links needed for

proper hanging height.

10. Use a pair of pliers to open one end link of the chain, attach

the chain to the fixture’s loop, and close the link. Slip Loop

Collar and Canopy over the chain. Open the other end link of

the chain and lift the fixture to attach to the ceiling loop, close

the chain link.

11. Lace the fixture’s wires through the chain links and pull until

taut. Feed the fixture wires through the loop and Nipple and

pull until taut.

CONNECTING THE WIRES (Fig. 3)

12. At this point, connect the electrical wire as shown in figure 3,

making sure that all wire connectors are secured. If your

outlet has a ground wire (green or bare copper), connect the

fixtures Ground Wire to it. Otherwise, connect the fixture

Ground Wire directly to the crossbar using the Green Screw

provided.

13. Tuck these wire connections neatly into the ceiling junction

box and then raise the canopy all the way to the ceiling.

Raise the Lock Collar and thread onto ceiling Loop protruding

through canopy.

14. Install the light bulbs in accordance with the fixture’s

specifications. (DO NOT EXCEED THE MAXIMUM

WATTAGE RATING!)

15. (Fig. 4) Place the Glass Bulb Shields (P) over the Studs (L)

located on the Support Plate (N). Place Washers (M) over the

Studs (L) and tightly secure with Knurled Knobs (O).

Your installation is now complete. Return power to the

junction box and test the fixture.

LA-685E

Nipple

Screw

Canopy

Chain

Hex Nut

Lock Washer

Crossbar

Loop

Lock Collar

Junction Box

(Ceiling)

FIXTURE

WIRES

Black or

Smooth

USE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

USE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

USE

WIRES

Green

(Ground)

INSTALLATION INSTRUCTIONS 1

Resumo do Conteúdo

Página 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS For Model # 1182/1183-357 (New 01/17/2003) WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. Fig. 1 Fig. 2 F

Comentários a estes Manuais

Sem comentários

Minka Lavery 1182-357 Manual de Instruções

Consulte online ou descarregue Manual de Instruções para não Minka Lavery 1182-357. Minka Lavery 1182-357 Instructions / Assembly Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com não Minka Lavery 1182-357