Minka Lavery 4952-267B Manual de Instruções descarregar pdf

INSTALLATION INSTRUCTION 4952

For Flush Mount Ceiling Fixture

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

READ AND SAVE THESE INSTRUCTIONS

Fig.1

CAUTION-RISK OF FIRE. CONSULT A QUALIFIED

ELECTRICIAN TO ENSURE CORRECT BRANCH

CIRCUIT CONDUCTOR. MIN 90˚C SUPPLY

CONDUCTORS.

MOUNTING THE FIXTURE

1. Shut off the power at the fuse box or circuit breaker

box. If necessary, remove the old fixture and all

mounting hardware from junction box.

2. Carefully remove the fixture from the carton and

check that all parts are included as shown in the

illustration.

3. Remove the shade (F) from the ceiling pan (D).

4. Thread mounting screws (C) (Size: #8-32*1.6”L) into

the matching holes in the crossbar (B). Secure

crossbar (B) to outlet box with junction box screws

(A) (Size: #8-32*0.6”L). The side of the crossbar

marked “GND” must face out.

5. At this point, connect the electrical wires as show in

(Fig. 2). Making sure all wire connectors are

secured. If your outlet has a ground wire (green or

bare copper), connect the fixture’s ground wire to it.

Otherwise connect fixture’s ground wire directly to

the crossbar using the green screw provided.

6. Tuck the wires neatly into the ceiling junction box

and then raise the ceiling pan (D) all the way to the

ceiling.

7. Align Ceiling pan (D) allowing for the mounting

screws (C) to protrude through key slots. Turn

Ceiling pan (D) clockwise until mounting screws (C)

are in narrow part of key slots, Tighten with

screwdriver.

8. Install the light bulbs (not included) in accordance

with the fixture’s specifications.

DO NOT EXCEED THE SPECIFIED WATTAGE!

(NE PAS DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!)

9. Place the glass panel (G) into the decorative ring (I),

then use the sheet metals (J) to compact the glass

panel (G).

10. Secure the decorative ring (I) to the bottom of

shade (F) with the screws (H).

11. Raise shade (F) to the canopy (D), then secure with

the screws (E).

Your installation is now complete. Return power to

the junction box and test the fixture.

Fig.1

Fig.2

Set#

-Crossbar

-Ground screw

-Mounting screw*2

-Junction box screws*2

A-016

INSTALLATION INSTRUCTION 4952 1

Resumo do Conteúdo

Página 1 - INSTALLATION INSTRUCTION 4952

INSTALLATION INSTRUCTION 4952For Flush Mount Ceiling FixtureWARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .AVERTISSEMENT! COUPER LE COURA

Comentários a estes Manuais

Sem comentários

Minka Lavery 4952-267B Manual de Instruções

Consulte online ou descarregue Manual de Instruções para não Minka Lavery 4952-267B. Minka Lavery 4952-267B Instructions / Assembly Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com não Minka Lavery 4952-267B